Take the pod off the new device, remove the insulating film at the bottom of the pod, and put the pod back
Remove the drip tip in the direction shown in the following graphic.
Fill the e-liquid into the red filling port, put the drip tip back, and the clicking sound hints at proper installation.
Let the pod sit for 10 minites before use.
Please remove the used pod from the device and change a new one for the pod replacement.
Attention
Fill the e-liquid into the red port. Please don’t fill through the middle airway. Put the drip tip back as soon as the filling is done and make sure it is properly installed to prevent e-liquid leakage.
Let the pod sit for 10 minutes after the first filloing to avoid coil burning,
Please make a timely refilling when the e-liquid is under MIN level.
Vaping
Draw to vape. The LED Light stays on during drawing, and the light animation starts after drawing.
Remove and insert the pod 3 times within 1.5 seconds to turn off the light animation, and the light flashes 3 times in purple as an indication.
Charging
the light flashes when connecting the Type-C cable. A red light indicates low battery power, a blue light indicates medium battery power, and green light indicates sufficient battery power.
The green light will stay on when the charging is done.
Protection and Indication
short-circuit protection: When short-circuit occurs, the light will flash 3 times in red when vaping, and the device will stop output.
Low Voltage Protection: When the device is at low power, the light will flash 10 times in red, and the device will stop output.
Overtime Protection: The light will flash 5 times in green to indicates an over 8-second vaping, and the device will stop output.
Open-circuit Protection: When an open-circuit occurs under a no pod or disconnection situation, the light will flash 3 times in blue, and the device gives no output during vaping
Attention 2
Please charge with the certified power adaptor (5V/2A) and USB cable.
Please remove the pod from the device and store is separately when you travel by air, for pressure chage may cause leakage.
Avoid high temperature, low remperature, flammables, explosives, water, and humid environment during the use or storage of the product. Please do not keep the product with hard objects to avoid damage, Please charge the device at least once a month
Specification Uwell Caliburn AK3
Materials: PCTG, Aluminium Alloy
Dimension: 67.5 mm. x 44.1 mm. x 12 mm.
Net Weight: 35.8 g.
E-Liquid Capacity: 2 ml.
Output Power: Maximum 13 W.
Battery Capacity: 520 mAh
Package Caliburn AK3
1x CALIBURN AK3 Device
1x Meshed 1.0 Ω CALIBURN A3 Refillable Pod (Pre-Installed)
1x Meshed 1.0 Ω CALIBURN A3 Refillable Pod (Spare)
1x สายคล้องคอ Silicone Lanyard
1x User Manual
สรุป
พอตไฟฟ้าในซีรีย์ Caliburn AK นั้นถูกพัฒนามาอย่างต่อเนื่องจนมาถึง AK3 ซึ่งทำให้มั่นใจได้ทางผู้ผลิตได้ปรับปรุงจุดด้อยและพัฒนาจุดเด่นไปจนถึงขั้นสุดยอดแล้ว
